Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

How do I create a single Dial List in which Connect assigns calls on a first-come, first-served basis?

A single Dial List contains one or more calls that are assigned to one or more agents. You can create a Dial List in which Connect assigns calls on a first-come, first-served basis; assigned agents might not own the Salesforce records (contact, account, lead, and so on) to which the calls relate. Alternatively—if enabled for your account—you can create a single Dial List in which Connect assigns calls to agents who own the records to which the calls relate. For information about creating a Dial List in which calls are assigned to the agents that own the records that the calls represent, see Creating a single Dial List (record ownership).

Dial Lists created using a filter are either static or dynamic. For information about dynamic Dial Lists, see Dynamic Dial Lists.

To create a single Dial List in which Connect assigns calls on a first-come, first-served basis, perform the following steps:

  1. Open a Create New Dial List page. You can open a new Create New Dial List page in the following ways:

    • From the Dial Lists tab. Click the Dial Lists tab and click New or New Dial List depending on which view is open. Create New Dial List appears.
    • From the Create New... menu. On the left side of the Salesforce window, click Create New... and then click Dial ListCreate New Dial List appears.

  2. On the Create New Dial List page, provide the following values:

    FieldDescription
    List NameType a suitable name for the Dial List that will make the list identifiable later. The value is not unique.
    List Type

    Select one of the types in the list, such as Contacts or Leads. The list type determines the type of customers you can select for your Dial List.

    Phone FieldSelect a phone number field. This field's contents appear in the Primary Phone field in call records created in association with this Dial List. Connect uses this phone number if available.
    Alternate Phone (optional)

    Select a phone number field. This field's contents appear in the Secondary Phone field in call records created in association with this Dial List. Connect uses this phone number if the Primary Phone field is empty.

    CreateTo create a single Dial List in which calls are assigned to agents on a first-come, first-serve basis, click . For information about creating alternative types of Dial Lists, see Creating Dial Lists from a filter.
    A call record is not created if the Primary Phone and Secondary Phone fields are both empty.
    The following fields are only available if the features are enabled for your account.

    For information about permissible call times, see Permissible call times for Dial Lists.

    Provide values in the following fields to specify permissible call times:

    FieldDescription

    Time Zone

    The time zone which both Start Time and End Time are expressed in.

    Start Time

    The start of the Dial List's permissible call time, that is, the time from which the Dial List is active. Type the start time in Coordinated Universal Time (UTC).
    If both Start Time and End Time are 00:00, when the Dial List is activated the list is always active.

    End Time

    The end of the Dial List's permissible call time, that is, the time at which the Dial List is no longer active. Type the end time in Coordinated Universal Time (UTC).
    If both Start Time and End Time are 00:00, when the Dial List is activated the list is always active.

    For information about cross-list prioritization, see Cross-list prioritization.

    To change the priority, modify the value in the Priority field:

    FieldDescription
    Priority

    The priority of the Dial List. Provide a value from 0 to 999. The lower the value, the greater the priority of the list. Lists with no value have the lowest priority.

    Click Next. The next page appears.

  3. Define the filtering and ordering settings for your Dial List.
    If you are creating a Dial List of Campaign Member type, see the Creating a Dial List of Campaign Member type section later in this page.

    • In the Filter By Fields section, you must define at least one filter that is used to select records.

      You can filter by fields on the object you're using or used to create the Dial List and on related objects. The steps here describe using fields on the object used or being used to create the Dial List. For information about using related objects in filtering Dial Lists, see the Using related object types in filtering and ordering Dial Lists section later in this page.

      • In the first field, select the record detail used for the first filter — the available details include fields on the object you're using or used to create the Dial List.
      • In the second field, select the comparison operator used.
      • In the third field, type the value to which the customer value is compared.

    If you want to include additional filters, click the plus (+) icon alongside one of the filters you have added. Another row of fields appears below that filter. Repeat this step for all filters you want to define. You can add up to 20 filters but best practice is to keep the number of filters to a minimum. You can reorder the filters as required using the up () and down () arrow icons to the left of the filters.

    • Optional. In the Filter Logic section, you can override the filter logic used.
      Filter Logic
      The default logic operator is AND—the filters you define in the Create New Filter section are joined. To override the default logic, refer to the filters by their numbers, for example, ((1 AND 3) OR (2 AND 5)) OR (4 AND 2).

      The NOT operator is not supported.

      If you want to filter record detail records by date — for example, the date the records were created, birth date of customers, date of last contact with customers — you must specify the date as an exact date or using a date literal. For further information about specifying dates, see Date Formats and Date Literals in Salesforce help.

      Using the following example:

      Filter 1Last Name equals Jones
      Filter 2Last Activity less than 2014-06-19
      Filter 3Department equals Sales

      the default filter logic returns customers whose details match all of the criteria.

      A filter logic of '((1 OR 2) AND 3)' returns the following customers:

      Customers whose last name is Jones OR whose record was last modified before 19th June 2014
      AND
      who are in the Sales department

    • Optional. In the Order By Fields section, define the order in which you want filter results to appear in the Dial List. We recommend that you do this. Defining the order determines the priority in which the records are contacted, with the first field in the list having the highest priority.

      You can order by fields on the object you're using or used to create the Dial List and on related objects. The steps here describe using fields on the object used or being used to create the Dial List. For information about using related objects in ordering Dial Lists, see the Using related object types in filtering and ordering Dial Lists section later in this page.

      • In the first field, select the customer detail used for the first sort option — the available details include fields on the object you're using or used to create the Dial List.
      • In the second field, select the sort order.
      • In the third field, select whether empty values should appear first or last in the Dial List.
      If you want to include additional sort options, click the plus (+) icon alongside one of the sort orders you have added. Another row of fields appears below that sort option. Repeat this step for all sort orders you want to define. You can reorder the fields as required the up (↑) and down (↓) arrow icons to the left of the fields.
      Order By Fields

  4. Click Generate List.

    Generate List

    Your new Dial List appears.

Before you or any assigned agents can use your Dial List, you must complete the following tasks:

  • Assign Dial Lists to agents. By default, Connect assigns all call records in static lists to you.
  • Activate the Dial List.

You can also edit filters (where applicable), change the priority of a Dial List, set permissible call times, and edit custom fields.

For information about these tasks, see Editing a Dial List.

Creating a Dial List of Campaign Member type

If you are creating a Dial List of Campaign Member type, you will most likely want to add all campaign members for a single campaign to the Dial List. To do this, in the filtering section:

  • In the first field, select Campaign ID.
  • In the second field, select Equals.
  • In the third field, type or search for the campaign for which you are creating your Dial List.

Optionally add additional filters, perhaps to include only campaign members who have not already responded.

Campaign members in a campaign represent contacts, leads, or both. When an agent clicks to make a call to the campaign member in a Dial List, Connect pops the related contact or lead rather than the campaign member. Connect associates the task created in relation to the Connect call with the contact or lead record.

Using related object types in filtering and ordering Dial Lists

When you are configuring filter and sort options you can filter or order by fields in objects of the type of Dial List you are creating or by fields on related records.

Related records (identified by the object type and the key that relates the two object types) appear at the bottom of the first fields in the Filter By Fields and Order By Fields sections.

Filter by related objects

When you select a related record, a second list appears below the first. In this second list, select the customer detail from the related record type to filter or sort by. In the remaining fields, select the comparison operator, sort order and as normal.

For example, you can filter a Dial List based on contacts with related accounts in which the Industry field is 'Banking'. To do this select 'Related Account - Account ID' in the first list, 'Industry' in the second list, and 'equals' in the third. Finally select 'Banking' in the final list.

Filter by related objects example

  • No labels