Page Comparison

If Advanced Reports If Advanced Reports and Statistics is enabled and configured for your account, you can use Conversation Analyzer in Salesforce.

...

To see Conversation Analyzer components in NVM Vonage Call Summary records, change the page layout that the NVM Vonage Call Summary object uses:

For inbound calls, use the NVM the Vonage Analytics Summary layout
For outbound calls, use the NVM Vonage Analytics Outbound Summary layout
For internal calls, use the NVM Vonage Analytics Internal Summary layout

The top section of the page layouts embeds Vonage Contact Center's Conversation Analyzer into an NVM Vonage Call Summary record. For information about the contents of Conversation Analyzer, see Conversation Analyzer.

Insert excerpt

	_ExcerptQMPermissions
	_ExcerptQMPermissions
nopanel	true

Other sections on the page layouts are customized for the call type, containing only the fields that are relevant to those calls.

When you or an agent views a NVM Vonage Call Summary record, Conversation Analyzer for the related call appears. You can see Conversation Analyzer in the Conversation Analyzer section of the record.

Image Modified

How do I retrieve call recording analytics data or transcripts, or both, using Advanced Reporting and Statistics?

As well as retrieving call summary and agent state statistics, Advanced Reporting and Statistics can retrieve call recording analytics data from Vonage Contact Center. Advanced Reporting and Statistics can also retrieve call recording transcripts. Advanced Reporting and Statistics stores the additional data in fields on the NVM Vonage Call Summary object.

To retrieve call recording analytics data or transcripts, or both, perform the following steps:

Go to Setup in Salesforce.
On the left-hand side of the Salesforce window, in the Quick Find field, type 'Installed Packages'.
In the filtered list of items, click Installed Packages. Installed Packages appears.
Locate and click NVM Vonage Advanced Reporting. NVM Vonage Advanced Reporting (Managed) appears.
Alongside Post Install Instructions, click View.

In the Global Settings and Mappings section, in Flags, type 'SPEECH'.

Info

title	Optional flags

You can add optional flags CAROWS and CA(0). For information about these flags, see Configuring when Vonage Call Summary records are created and Configuring Conversation Analyzer Insights records later Configuring storage of category and subcategory data later in this page.

Click Save All. Fetch Analytics and Fetch Transcript check boxes appear in the Channels section.

Alongside each channel, select check boxes as required:

Fetch Analytics. Select the Fetch Analytics check box to retrieve and store the following data:

If you do not

Data to retrieve

Fields to store data in

Notes

Category and subcategory data

Category and subcategory data can be stored in one of the following places:

Conversation Analyzer Insights records
Custom category and subcategory

fields.Because you can customize categories and subcategories, you must create the fields yourself. For information, see Creating custom

fields

for categories and subcategories later in this page.

Info
Matched categories also appear in the Categories (NVMStatsSF__Categories__c) field.

For information, see Configuring storage of category and subcategory data later in this page.

If you do not configure Conversation Analyzer Insights records or provide all related category and subcategory fields, Advanced Reporting and Statistics reports an error and does not retrieve applicable category and subcategory data.

Percentage of agent talk time

Agent Percent (NVMStatsSF__Agent_Percent__c)

Fields appear in the Caller and Agent Related section. If the field do not appear, add them to the relevant NVM Vonage Call Summary page layouts.

Percentage of talkover time

Crosstalk Percent (NVMStatsSF__Crosstalk_Percent__c)

Percentage of customer talk time

Customer Percent (NVMStatsSF__Customer_Percent__c)

Percentage of silence time

Silence Percent (NVMStatsSF__Silence__c)

Level of confidence

Confidence (NVMStatsSFConfidence__c)

Language of call

Language (NVMStatsSFlanguage__c)

Sentiment summary and scores

Sentiment (NVMStatsSF__Sentiment__c)

Field appears in the Information section in the Vonage Call Summary object if sentiment analysis is enabled for your account. If the sentiment field does not appear, add it to the relevant NVM Vonage Call Summary page layouts.

Fetch Transcript. Select the Fetch Transcript check box to retrieve call recording transcripts. The transcript is stored in the Call Transcription field and is searchable within Salesforce.

Click Save All. Next time a transaction runs, it uses the new settings and retrieves additional analytics data. Advanced Reporting and Statistics populates NVM Vonage Call Summary record fields as appropriate.

Configuring when Vonage Call Summary records are created

From Advanced Reporting and Statistics version 2.84 onwards, you can add the CA(0) flag. This flag determines how quickly the package should get data for Vonage Call Summary records. By default, the package waits 3600 seconds between Vonage Call Transcription, Categorization, and pulling the resultant data into Salesforce. CA(0) instructs the package to override the default wait of 3600 seconds with 0 seconds. Because Conversation Analyzer data is checked every 15 minutes, this will typically load the analytics data into your org 1–16 minutes after the data analysis is completed. You may use other values but 0 is recommended.

...

Configuring storage of category and subcategory data

From Advanced Reporting and Statistics version 2.84 onwards, you can add the CAROWS flag. This flag instructs the package to create child Conversation Analyzer Insights records under a Vonage Call Summary record. A Conversation Analyzer Insights record is created for each combination of category or subcategory matches for each call. This avoids the need to create custom fields for categories and subcategories.

...

have two different ways of storing category and subcategory data, each with different benefits.

Using Conversation Analyzer Insights records
You can store the data in Conversation Analyzer insights records. Advanced Reporting and Statistics creates a new record in Salesforce for each identified subcategory. While this uses additional Salesforce storage, it significantly reduces administration tasks and simplifies reporting.

Info

title	Data storage requirements

The maximum number of rows created for each call — if all your defined Conversation Analyzer categories are matched at least once — is number of categories x number of subcategories.

Each row consumes 2 kB of Salesforce data storage.

For information, see Configuring Conversation Analyzer Insights records.

...

Using custom fields for categories and subcategories

...

You can store the data in custom category and subcategory fields on the Vonage Call Summary

...

record. (The Advanced Reporting and Statistics managed package provides custom fields to store other analytics data.) Each category and subcategory

...

requires a corresponding field

...

. While this approach integrates the data into existing call objects, avoiding additional storage usage, it increases admin tasks as you need to add new fields each time you have a new category or subcategory. Reporting on this data using this method is also more complex.
For information, see Creating custom fields for categories and subcategories.

You can configure one, both, or neither way. If you don't configure either, Advanced Reporting and Statistics doesn't retrieve any category and subcategory data.

Configuring Conversation Analyzer Insights records

Expand

To store category and subcategory data in Conversation Analyzer Insights records, perform the following tasks:

Add the CAROWS flag. This flag instructs the Advanced Reporting and Statistics to create child Conversation Analyzer Insights records under a Vonage Call Summary record. A Conversation Analyzer Insights record is created for each subcategory (along with its category) match for each call. This avoids the need to create custom fields for categories and subcategories but will require additional Salesforce storage.
Optionally (but recommended), add the Conversation Analyzer Insights related list to the applicable Vonage Call Summary page layouts. Then add the columns in the related lists in the Vonage Call Summary records. This will display the retrieved data in Vonage Call Summary records.
Image Added

Next time Advanced Reporting and Statistics runs, it retrieves category and subcategory data and creates Conversation Analyzer Insights records as required.

Creating custom fields for categories and subcategories

Expand
To add custom fields for categories and subcategories, create a custom checkbox field for each category and a number field for each subcategory

...

you have configured for the Conversation Analyzer feature. Set Field Name

...

— as referenced by

...

APIs — for the fields using the following format:

Categories: Category__c
Subcategories: Category_subcategory__c

Note

Set Default Value for the field to Unchecked for the category check boxes and 0 for the subcategory number fields.

The values you specify in Field Name fields are case-insensitive. Field Name values must be a case-insensitive match for the category and subcategory names as configured in Vonage Contact Center.

Where spaces and other nonalphanumeric characters appear in the names used in Vonage Contact Center, replace such characters with an underscore (_) character. Advanced Reporting and Statistics do not support names with two consecutive underscores, and names are subject to the length limit for Field Name values in Salesforce. For information about field names in Salesforce, see Salesforce help.

Salesforce appends the __c to Field Name indicating that this is a custom field.

Field Label values, which appear in records and on reports, do not need to match a specified format, but we recommend that you align them to the Field Name values.

For example, if you have a Communication category and an Active listening subcategory, create fields with the following types, labels, names, and default values:

Category/subcategory	Type	Field type	Field Label	Field Name	Default Value
Communication	Category	Checkbox	Communication	Communication__c	Unchecked
Active listening	Subcategory	Number	Active listening	Communication_Active_listening__c	0

Optionally, create a section on the summary page layouts and add the category and subcategory custom fields. This will display the retrieved data in Vonage Call Summary records.

Next time

...

Advanced Reporting and

...

Statistics runs, it retrieves category and subcategory data and populates custom fields as appropriate. A checked field indicates that the transcript of the call recording matched the category or subcategory.

Image Modified

Creating custom fields for sentiment percentages and scores

...

Panel
Overall:+0.65, VeryNegative:5, Negative:25, Neutral:40, Positive:20, VeryPositive:10, Scores:+0.00,+0.00,-0.11,+0.00,+0.00,+0.00,+0.56,+0.61,+0.75,+0.77

Overall score

Expand

To extract the overall score from Sentiment and put it into a separate custom field, you must create a formula-type custom field that uses the provided formula. Set the Field Name for this custom fields to OverallSentimentScore__c and Field Label to Overall Sentiment Score. Use the following formula. The formula returns a number value.

Code Block

language	sql
theme	Eclipse
title	Overall Sentiment Score

BLANKVALUE(
  VALUE(
    TRIM(
      LEFT(
        SUBSTITUTE(
          SUBSTITUTE(NVMStatsSF__Sentiment__c, "Overall:", ""),
        ",",
        " "),
      6)
    )
  ),
0)

Sentiment percentages

Expand

To put percentages of incidences of very negative, negative, neutral, and so on, sentiments into individual fields, firstly, create custom fields. You'll need a formula-type custom field for each of the percentages you want to save. Set Field Names for these custom fields to VeryNegativeSentiment__c, NegativeSentiment__c, NeutralSentiment__c, and so on, and Field Labels to Very Negative Sentiment, Negative Sentiment, Neutral Sentiment, and so on.

The following formulas return number values.

Use the following formula for the VeryNegativeSentiment__c field:

Code Block

language	sql
theme	Eclipse
title	Very Negative Sentiment

VALUE(
  TRIM(
    LEFT (
      SUBSTITUTE (
        MID(NVMStatsSF__Sentiment__c,
        FIND("VeryNegative:", NVMStatsSF__Sentiment__c)+13,
        6),
      ",", "      "),
    6)
  )
)

Use the following formula for the NegativeSentiment__c field:

Code Block

language	sql
theme	Eclipse
title	Negative Sentiment

VALUE(
  TRIM(
    LEFT(
      SUBSTITUTE(
        MID(NVMStatsSF__Sentiment__c,
        FIND(", Negative:", NVMStatsSF__Sentiment__c)+11,
        6),
      ",", "      "),
    6)
  )
)

Use the following formula in the NeutralSentiment__c field:

Code Block

language	sql
theme	Eclipse
title	Neutral Sentiment

VALUE(
  TRIM(
    LEFT (
      SUBSTITUTE (
        MID(NVMStatsSF__Sentiment__c,
        FIND("Neutral:", NVMStatsSF__Sentiment__c)+8,
        6),
      ",", "      "),
    6)
  )
)

Use the following formula in the PositiveSentiment__c field:

Code Block

language	sql
theme	Eclipse
title	Positive Sentiment

VALUE(
  TRIM(
    LEFT(
      SUBSTITUTE(
        MID(NVMStatsSF__Sentiment__c,
        FIND(", Positive:", NVMStatsSF__Sentiment__c)+11,
        6),
      ",", "      "),
    6)
  )
)

Use the following formula for the VeryPositiveSentiment__c field:

Code Block

language	sql
theme	Eclipse
title	Very Positive Sentiment

VALUE(
  TRIM(
    LEFT (
      SUBSTITUTE (
        MID(NVMStatsSF__Sentiment__c,
        FIND("VeryPositive:", NVMStatsSF__Sentiment__c)+13,
        6),
      ",", "      "),
    6)
  )
)

Sentiment scores

Expand

To extract each of the individual scores from Sentiment and put them into separate custom fields, you must create ten formula-type custom fields. Set Field Names for these custom fields to SentimentScore0__c, SentimentScore1__c, SentimentScore2__c, and so on, and Field Labels to Sentiment Score 0, Sentiment Score 1, and Sentiment Score 2. Use the following formula in the individual sentiment fields, replacing n with the specific sentiment score position. The formula returns a number value.

Code Block

language	sql
theme	Eclipse
title	Sentiment Score n

VALUE(
	MID(RIGHT(NVMStatsSF__Sentiment__c,59) , 1+6*n, 5)
)

For Sentiment Score 0 field, use the following formula:

Code Block

language	sql
theme	Eclipse
title	Sentiment 0

VALUE(
	MID(RIGHT(NVMStatsSF__Sentiment__c,59) , 1+6*0, 5)
)

For Sentiment Score 9 field, use the following formula:

Code Block

language	sql
theme	Eclipse
title	Sentiment Score 9

VALUE(
	MID(RIGHT(NVMStatsSF__Sentiment__c,59) , 1+6*9, 5)
)

Individual sentiment examples
This example uses the following value in the Sentiment field:

Panel
Overall:+0.65, VeryNegative:5, Negative:25, Neutral:40, Positive:20, VeryPositive:10, Scores:+0.00,+0.00,-0.11,+0.00,+0.00,+0.00,+0.56,+0.61,+0.75,+0.77

Using the formula above in the Sentiment Score 0 field would result in the following value:

Panel
+0.00

Using the formula above in the Sentiment Score 9 field would result in the following value:

Panel
+0.77

Versions Compared

Old Version 13

New Version Current

Key

How do I retrieve call recording analytics data or transcripts, or both, using Advanced Reporting and Statistics?

Configuring when Vonage Call Summary records are created

Configuring storage of category and subcategory data

Configuring Conversation Analyzer Insights records

Creating custom fields for categories and subcategories

Creating custom fields for sentiment percentages and scores

Overall score

Sentiment percentages

Sentiment scores