Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Insert excerpt_ExcerptCallRecordingsSF_ExcerptCallRecordingsSFnopaneltrue

To access the call recordings, you must log in to ContactWorld and locate the recording in Call Recordings. Alternatively, you can configure the NVM Call Summary object to display the call recording player within Salesforce.

If enabled for your account, conversation analyzer enriches the call recording player experience. Conversation analyzer adds the following featuresIf Advanced Reports and Statistics is enabled and configured for your account, you can use Conversation Analyzer in Salesforce.

Conversation Analyzer adds the following features to your Salesforce org:

  • Voice visualization
  • Event timeline
  • Transcript of the recording
  • Categorization of the contents of the recording

...

  • Transcript confidence score (High/Medium/Low)
  • Sentiment summary and scores, if sentiment analysis is enabled for your account
Info

If the conversation analyzer feature Conversation Analyzer is not enabled for your account, you can use call recording annotation. For information about configuring call recording annotation, see Configuring call recording annotation in Salesforce.

If enabled for your account, to use the conversation anaylzer feature Conversation Analyzer in Salesforce, you must perform various configuration tasks.

Panel
borderColor#eeeeee
bgColorwhite
titleColorwhite
borderWidth1
titleBGColor#232323
borderStylesolid
titleIn this page

Table of Contents
depth2

Prerequisites for configuring Conversation Analyzer in Salesforce

Before you can configure Conversation Analyzer in Salesforce, you must install and configure Advanced Reports and Statistics. For information about Advanced Reports and Statistics, see Advanced Reporting and Statistics in Salesforce.

How do I make

...

Conversation Analyzer available in Salesforce?

To see the conversation analyzer Conversation Analyzer components in NVM Vonage Call Summary records, change the page layout that the NVM Vonage Call Summary object uses:

  • For inbound calls, use the NVM the Vonage Analytics Summary layout
  • For outbound calls, use the NVM Vonage Analytics Outbound Summary layout
  • For internal calls, use the NVM Vonage Analytics Internal Summary layout

The top section of the page layouts embeds ContactWorld's conversation analyzer Vonage Contact Center's Conversation Analyzer into an NVM Vonage Call Summary record. For information about the contents of the conversation analyzerConversation Analyzer, see Call RecordingsConversation Analyzer.

Insert excerpt
_ExcerptQMPermissions
_ExcerptQMPermissions
nopaneltrue

Other sections on the page layouts are customized for the call type, containing only the fields that are relevant to those calls.

When you or an agent views a NVM Vonage Call Summary record, the conversation analyzer Conversation Analyzer for the related call appears. You can see the conversation analyzer Conversation Analyzer in the Conversation Analyzer section of the record.

Conversation AnalyzerImage Modified

How do I retrieve call recording analytics data or transcripts, or both, using Advanced Reporting and Statistics?

As well as retrieving call summary and agent state statistics, Advanced Reporting and Statistics can retrieve call recording analytics data from ContactWorld Vonage Contact Center. Advanced Reporting and Statistics can also retrieve call recording transcripts. Advanced Reporting and Statistics stores the addition additional data in fields on the NVM Vonage Call Summary object.

To retrieve call recording analytics data or transcripts, or both, perform the following steps:

  1. Go to Setup in Salesforce.
  2. On the left-hand side of the Salesforce window, in the Quick Find field, type 'Installed Packages'.
  3. In the filtered list of items, click Installed PackagesInstalled Packages appears.
  4. Locate and click NVM Vonage Advanced Reporting. NVM Vonage Advanced Reporting (Managed) appears.

  5. Alongside Post Install Instructions, click View.

  6. In the Global Settings and Mappings

     section

     section, in Flags, type 'SPEECH'.

    Info
    titleOptional flags
    You can add optional flags CAROWS and CA(0). For information about these flags, see Configuring when Vonage Call Summary records are created and Configuring storage of category and subcategory data later in this page.

    Click Save All. Fetch Analytics and Fetch Transcript check boxes appear in the Channels section.

  7. Alongside each channel, select check boxes as required:
    • Fetch Analytics. Select the Fetch Analytics check box to retrieve and store the following data:

      Data to retrieveFields to store data inNotes
      Category and subcategory data

      Category and subcategory data can be stored in one of the following places:

      • Conversation Analyzer Insights records
      • Custom category and subcategory fields

      .

      Because you can customize categories and subcategories, you must create the fields yourself. For information, see Creating custom fields for categories and subcategories.

      Info
      Matched categories also appear in the Categories (NVMStatsSF__Categories__c) field.

      For information, see Configuring storage of category and subcategory data later in this page.

      If you do not configure Conversation Analyzer Insights records or provide all related category and subcategory fields, Advanced Reporting and Statistics reports an error and does not retrieve applicable category and subcategory data.

      Percentage of agent talk time

      Agent Percent (

      NVMStatsSF

      NVMStatsSF__Agent_Percent__c)

      Fields appear in the Caller and Agent Related section. If the field do not appear, add them to the relevant Vonage Call Summary page layouts.

      Percentage of talkover time

      Crosstalk Percent (

      NVMStatsSF

      NVMStatsSF__Crosstalk_Percent__c)

      Percentage of customer talk time

      Customer Percent (

      NVMStatsSF

      NVMStatsSF__Customer_Percent__c)

      Percentage of silence time

      Silence Percent (

      NVMStatsSF

      NVMStatsSF__Silence

      _Percent__c)

      __c)

      Level of confidenceConfidence (NVMStatsSFConfidence__c)
      Language of callLanguage (NVMStatsSFlanguage__c)
      Sentiment summary and scoresSentiment (NVMStatsSF__Sentiment__c)Field appears in the Information section in the Vonage Call Summary object if sentiment analysis is enabled for your account. If the sentiment field does not appear, add it to the relevant Vonage Call Summary page layouts.


    • Fetch Transcript. Select the Fetch Transcript check box to retrieve call recording transcripts. The transcript is stored in the Call Transcription field and is searchable within Salesforce.
  8. Click Save All. Next time a transaction runs, it uses the new settings and retrieves additional analytics data. Advanced Reporting and Statistics populates NVM Vonage Call Summary record fields as appropriate.

...

Configuring when Vonage Call Summary records are created

From Advanced Reporting and Statistics version 2.84 onwards, you can add the CA(0) flag. This flag determines how quickly the package should get data for Vonage Call Summary records. By default, the package waits 3600 seconds between Vonage Call Transcription, Categorization, and pulling the resultant data into Salesforce. CA(0) instructs the package to override the default wait of 3600 seconds with 0 seconds. Because Conversation Analyzer data is checked every 15 minutes, this will typically load the analytics data into your org 1–16 minutes after the data analysis is completed. You may use other values but 0 is recommended.

Configuring storage of category and subcategory data

From Advanced Reporting and Statistics version 2.84 onwards, you have two different ways of storing category and subcategory data, each with different benefits.

  • Using Conversation Analyzer Insights records
    You can store the data in Conversation Analyzer insights records. Advanced Reporting and Statistics creates a new record in Salesforce for each identified subcategory. While this uses additional Salesforce storage, it significantly reduces administration tasks and simplifies reporting.

    Info
    titleData storage requirements

    The maximum number of rows created for each call — if all your defined Conversation Analyzer categories are matched at least once — is number of categories x number of subcategories.

    Each row consumes 2 kB of Salesforce data storage.

    For information, see Configuring Conversation Analyzer Insights records.

  • Using custom fields for categories and subcategories

...

  • You can store the data in custom category and subcategory fields

...

  • on the Vonage Call Summary record. (The Advanced Reporting and Statistics managed package provides custom fields to store other analytics data.) Each category and subcategory

...

  • requires a corresponding field. While this approach integrates the data into existing call objects, avoiding additional storage usage, it increases admin tasks as you need to add new fields each time you have a new category or subcategory. Reporting on this data using this method is also more complex.
    For information, see Creating custom fields for categories and subcategories.

You can configure one, both, or neither way. If you don't configure either, Advanced Reporting and Statistics doesn't retrieve any category and subcategory data.

Configuring Conversation Analyzer Insights records

Expand

To store category and subcategory data in Conversation Analyzer Insights records, perform the following tasks:

  1. Add the CAROWS flag. This flag instructs the Advanced Reporting and Statistics to create child Conversation Analyzer Insights records under a Vonage Call Summary record. A Conversation Analyzer Insights record is created for each subcategory (along with its category) match for each call. This avoids the need to create custom fields for categories and subcategories but will require additional Salesforce storage.
  2. Optionally (but recommended), add the Conversation Analyzer Insights related list to the applicable Vonage Call Summary page layouts. Then add the columns in the related lists in the Vonage Call Summary records. This will display the retrieved data in Vonage Call Summary records.
    Image Added

Next time Advanced Reporting and Statistics runs, it retrieves category and subcategory data and creates Conversation Analyzer Insights records as required.

Creating custom fields for categories and subcategories

Expand

To add custom fields for categories and subcategories, create a custom checkbox field for each category and a number field for each subcategory

...

you have configured for the

...

Conversation Analyzer feature. Set Field Name

...

 — as referenced by

...

APIs — for the fields using the following format:

  • Categories: Category__c
  • Subcategories: Category_subcategory__c
Note

Set Default Value for the field to Unchecked for the category check boxes and 0 for the subcategory number fields.

The values you specify in Field Name fields are case-insensitive. Field Name values must be a case-insensitive match for the category and subcategory names as configured in

ContactWorld

Vonage Contact Center.

Where spaces and other nonalphanumeric characters appear in the names used in

ContactWorld

Vonage Contact Center, replace such characters with an underscore (_) character. Advanced Reporting and Statistics do not support names with two consecutive underscores, and names are subject to the length limit for Field Name values in Salesforce. For information about field names in Salesforce, see Salesforce help.

Salesforce appends the __c to Field Name indicating that this is a custom field.

Field Label values, which appear in records and on reports, do not need to match a specified format, but we recommend that you align them to the Field Name values.

For example, if you have a Communication category and an Active listening subcategory, create fields with the following types, labels, names, and default values:

Category/subcategoryTypeField typeField LabelField NameDefault Value
CommunicationCategoryCheckboxCommunicationCommunication__cUnchecked
Active listeningSubcategoryNumberActive listeningCommunication_Active_listening__c0

Optionally, create a section on the summary page layouts and add the category and subcategory custom fields. This will display the retrieved data in Vonage Call Summary records.

Next time

...

Advanced Reporting and

...

Statistics runs, it retrieves category and subcategory data and populates custom fields as appropriate. A checked field indicates that the transcript of the call recording matched the category or subcategory.

CategoriesImage Modified

Creating custom fields for sentiment percentages and scores

If sentiment analysis is enabled for your account, you can configure Advanced Reporting and Statistics to retrieve sentiment summaries and scores along with call recording analytics data or transcripts, or both. For information about retrieving sentiment data, see the Fetch Analytics table earlier in this page. If you retrieve this data, the Sentiment field will contain a string of concatenated sentiment data. For information about this data, see Analyzing a call recording in Conversation Analyzer in Salesforce.

To make this data easier to read, or to report on it, you can separate the data into multiple fields. The following code samples extract data from a Sentiment field, for example:

Panel

Overall:+0.65, VeryNegative:5, Negative:25, Neutral:40, Positive:20, VeryPositive:10,
Scores:+0.00,+0.00,-0.11,+0.00,+0.00,+0.00,+0.56,+0.61,+0.75,+0.77

Overall score

Expand

To extract the overall score from Sentiment and put it into a separate custom field, you must create a formula-type custom field that uses the provided formula. Set the Field Name for this custom fields to OverallSentimentScore__c and Field Label to Overall Sentiment Score. Use the following formula. The formula returns a number value.

Code Block
languagesql
themeEclipse
titleOverall Sentiment Score
BLANKVALUE(
  VALUE(
    TRIM(
      LEFT(
        SUBSTITUTE(
          SUBSTITUTE(NVMStatsSF__Sentiment__c, "Overall:", ""),
        ",",
        " "),
      6)
    )
  ),
0)


Sentiment percentages

Expand

To put percentages of incidences of very negative, negative, neutral, and so on, sentiments into individual fields, firstly, create custom fields. You'll need a formula-type custom field for each of the percentages you want to save. Set Field Names for these custom fields to VeryNegativeSentiment__c, NegativeSentiment__c, NeutralSentiment__c, and so on, and Field Labels to Very Negative Sentiment, Negative Sentiment, Neutral Sentiment, and so on.

The following formulas return number values.

Use the following formula for the VeryNegativeSentiment__c field:

Code Block
languagesql
themeEclipse
titleVery Negative Sentiment
VALUE(
  TRIM(
    LEFT (
      SUBSTITUTE (
        MID(NVMStatsSF__Sentiment__c,
        FIND("VeryNegative:", NVMStatsSF__Sentiment__c)+13,
        6),
      ",", "      "),
    6)
  )
)

Use the following formula for the NegativeSentiment__c field:

Code Block
languagesql
themeEclipse
titleNegative Sentiment
VALUE(
  TRIM(
    LEFT(
      SUBSTITUTE(
        MID(NVMStatsSF__Sentiment__c,
        FIND(", Negative:", NVMStatsSF__Sentiment__c)+11,
        6),
      ",", "      "),
    6)
  )
)

Use the following formula in the NeutralSentiment__c field:

Code Block
languagesql
themeEclipse
titleNeutral Sentiment
VALUE(
  TRIM(
    LEFT (
      SUBSTITUTE (
        MID(NVMStatsSF__Sentiment__c,
        FIND("Neutral:", NVMStatsSF__Sentiment__c)+8,
        6),
      ",", "      "),
    6)
  )
)

Use the following formula in the PositiveSentiment__c field:

Code Block
languagesql
themeEclipse
titlePositive Sentiment
VALUE(
  TRIM(
    LEFT(
      SUBSTITUTE(
        MID(NVMStatsSF__Sentiment__c,
        FIND(", Positive:", NVMStatsSF__Sentiment__c)+11,
        6),
      ",", "      "),
    6)
  )
)

Use the following formula for the VeryPositiveSentiment__c field:

Code Block
languagesql
themeEclipse
titleVery Positive Sentiment
VALUE(
  TRIM(
    LEFT (
      SUBSTITUTE (
        MID(NVMStatsSF__Sentiment__c,
        FIND("VeryPositive:", NVMStatsSF__Sentiment__c)+13,
        6),
      ",", "      "),
    6)
  )
)


Sentiment scores

Expand

To extract each of the individual scores from Sentiment and put them into separate custom fields, you must create ten formula-type custom fields. Set Field Names for these custom fields to SentimentScore0__c, SentimentScore1__c, SentimentScore2__c, and so on, and Field Labels to Sentiment Score 0, Sentiment Score 1, and Sentiment Score 2. Use the following formula in the individual sentiment fields, replacing n with the specific sentiment score position. The formula returns a number value.

Code Block
languagesql
themeEclipse
titleSentiment Score n
VALUE(
	MID(RIGHT(NVMStatsSF__Sentiment__c,59) , 1+6*n, 5)
)

For Sentiment Score 0 field, use the following formula:

Code Block
languagesql
themeEclipse
titleSentiment 0
VALUE(
	MID(RIGHT(NVMStatsSF__Sentiment__c,59) , 1+6*0, 5)
)

For Sentiment Score 9 field, use the following formula:

Code Block
languagesql
themeEclipse
titleSentiment Score 9
VALUE(
	MID(RIGHT(NVMStatsSF__Sentiment__c,59) , 1+6*9, 5)
)

Individual sentiment examples
This example uses the following value in the Sentiment field:

Panel

Overall:+0.65, VeryNegative:5, Negative:25, Neutral:40, Positive:20, VeryPositive:10,
Scores:+0.00,+0.00,-0.11,+0.00,+0.00,+0.00,+0.56,+0.61,+0.75,+0.77

Using the formula above in the Sentiment Score 0 field would result in the following value:

Panel

+0.00

Using the formula above in the Sentiment Score 9 field would result in the following value:

Panel

+0.77